All Categories

SR-E002 — Smart Water Leak Sensor SR-E002

  • Overview
  • Recommended Products

Product Overview

SR-E002 — Smart Water Leak Sensor SR-E002

Model: Model: SR-E002 |Category:Category: Sensors

The TAOS SR-E002 is a smart water leak sensor engineered by Zhejiang TAOS Electric (est. 2000) for the Sensors segment of the Smart Home portfolio. It is designed for Tuya / Zigbee 3.0 ecosystems, supports Alexa & Google Home voice control, and complies with CE, RoHS, FCC, IEC 62368-1 and the Tuya Develop certification programme. Listed for export to 30+ countries across the Middle East, Africa, Europe and Southeast Asia.

Why Specify SR-E002?

Four engineering decisions that turn this device into a project-grade specification.

Multi-protocol radio core

Zigbee 3.0 plus optional BLE/Wi-Fi keeps the same enclosure deployable across hotel, residential and commercial RFPs.

Years of battery life

Optimised duty-cycle gives 18–36 months on a single CR2450, cutting service-call frequency by 70 %.

Tamper-proof design

Cover-removal alarm, lockable mounting hardware and IP-rated housings built for high-traffic areas.

Dense-mesh resilience

Tuya Zigbee 3.0 stack has been load-tested with 200+ devices on a single coordinator without drop-out.

Detailed Specifications

Datasheet excerpts — full datasheet PDF available on request.

Parameter

Value

Model

SR-E002

Protocol

Zigbee 3.0 / Tuya

Detection

Conductive water probe + 1 m cable

Battery

CR2 ×1, ~3 years

Alarm

Local 70 dB buzzer + app push

IP

IP67 sensor body

Certifications & Compliance

Authoritativeness signals — independent third-party verification of every test marked above.

CE.png

CE Marking (EU)

EN 60669-1 / EMC Directive 2014/30/EU

UKCA.jpg

UKCA

BS1363, UK market

SQM.jpg

SASO / SQM (Saudi Arabia)

SABER-registered for KSA customs clearance

CE.png

SONCAP (Nigeria)

Standards Organisation of Nigeria Conformity Assessment

GCC.jpg

GCC / G-mark

Gulf Cooperation Council

ECAS.jpg

ECAS

UAE market

ROHS.jpg

RoHS 2.0

Free of lead, cadmium, mercury, hexavalent chromium

图片1.png

CB Scheme

IECEE certificate, fast-track recognition in 50+ countries

Typical Application Scenarios

•see scene image: SR-E002-sensor-leak-bathroom-floor.png
Sensor Leak Bathroom Floor

•see scene image: SR-E002-sensor-leak-bathroom-floor.png

•see scene image: SR-E002-sensor-leak-kitchen-sink.png
Sensor Leak Kitchen Sink

•see scene image: SR-E002-sensor-leak-kitchen-sink.png

•see scene image: SR-E002-sensor-leak-laundry-room.png
Sensor Leak Laundry Room

•see scene image: SR-E002-sensor-leak-laundry-room.png

Frequently Asked Questions

Q: How is the sensor powered?
Battery powered (CR2450 / AAA depending on model) with 18–36 month lifetime, or hard-wired DC variants for ceiling installations.
Q: What protocol does it use?
Zigbee 3.0 by default for low power; selected SKUs offer Wi-Fi or Bluetooth for stand-alone use.
Q: What is the detection range?
Refer to the spec table below — typical PIR/mmWave coverage is 6–12 m; door sensors trigger at >25 mm gap.
Q: Does it work with the TAOS Smart Gateway?
Yes. It also pairs with any Tuya Zigbee 3.0 hub; a TAOS gateway extends features such as local scenes and HomeKit relay.
Q: Is it tamper-protected?
Yes, an internal tamper switch sends an alert if the cover is removed.
Q: Can it work outdoors?
Indoor SKUs are IP20; the SR-G001 garage and SR-T001 outdoor variants are IP54-rated for sheltered exterior use.

Get a Free Quote

Our representative will contact you soon.
Email
Name
Mobile
Company Name
Message
0/1000